ENVITEC OM102 OOM201 OOM202 OOM204 Series Medical Oxygen (O2) Sensor | 0-100%vol

Part Number: OM102 OOM201 OOM202 OOM204 Series

Specifications:

Measuring range: 0-100%
Output signal in air: – 13-16mV
Circuit interface: – 3Pin(Molex)
Precision and repeatability: – <1% oxygen by volume, after calibration in 100% oxygen
Linearity error: – <3% relative error
Response time: – <12 seconds, relative to 90% relative value
Zero drift: – <200 u V placed in 100% ammonia for 5 minutes
Cross interference: – <0.5% volume oxygen for:
– 10% co2, in balanced ammonia
– 80% N20, in balanced ammonia
– 7.5% halothane, in balanced ammonia
– 7.5% isoflurane, in balanced ammonia
– 7.5% enflurane, in balanced ammonia
– 9% enflurane, in equilibrium nitrogen
– 20% desflurane, in balanced nitrogen
Influence of temperature: – -0.03% relative temperature, 25℃
The effects of stress: – Proportional to oxygen partial pressure
Mechanical shock effects: – <1% relative error, after falling from a height of 1 meter
Operating temperature: – 0℃-50℃
Temperature compensation: – Built-in thermistor compensation
Temperature effect – 25℃-40℃, 3% relative error
Compensation (steady state): – Between 0℃-50℃, relative error of 8%
Working humidity: – 0-99% RH (several hours in condensable air)
Storage temperature: – -20℃- 50℃
Recommended storage temperature: – 5℃ ~ 15℃
Recommended load: – ≥ 10Ω
Preheat time: – <30 minutes, after replacing the sensor
Rated sensor life: – ≥ 1000 000% volume oxygen hour
Weight: – About 28G

Note: Graphics of these sensors are an example only and sensor cap/body colour may vary depending upon gas sensor type ordered or manufacturing modification. Please refer to individual datasheets for detailed information on these sensors and their corresponding dimensions.

Contact Sensorcheap today for bulk pricing and technical support!